Hep₂O Underfloor heating has solutions for any project, large or small. We offer offer a comprehensive range of services to support you before, during and after installation. We have systems for all floor types so whether it is new build or retrofit we can help you find the right solution.
System Plates are for general use, suiting both liquid and conventional screeds. The sheets are laid over insulation and the heating pipe is pushed into the clips within them. This helps ensure regular pipe spacing.
Staples System for Screeded Floor
In this system the heating pipe is stapled to insulation prior to screeding, which offers total flexibility of heating pipe layout. This system is particularly useful for irregular areas.
Low-Build Panel Systems
The low-build systems are for fitting on top of an existing floor and are a great solution for retro-fit projects, where build height is critical. Choose from:
15mm LowBuild Max, no diffuser plates needed, durable - tile straight onto the panels (10mm pipe)
15mm ultra slim insulation panels, with metal diffuser plates pre-fitted (10mm pipe)
25mm floating floor option, for longer circuit lengths and multiple zones (15mm pipe, diffuser plates separate)
Panel Systems for Joisted Floors
This system is for suitable for joisted or battened floor constructions. The panels can be installed from above or below. The 340mm wide panel slots between evenly spaced joists at 400mm centres. Diffuser plates should be ordered separately.
We also supply packs of Diffuser plates. These are metal plates with a channel for 15mm pipe, which are fitted over the insulation layer and disperse the heat from the pipe across the floor.
Use the new Hep2O Underfloor heating tool, HepCalc. This tool provides you with a comprehensive system selection tool and creates a bespoke quote once you have entered all project details. Get a free quote here
Hep2O Low-Build Max provides perfect home heating solution
For a domestic refurbishment project an alternative, cost effective heating solution to radiators was required. As this was a residential property an easy and quick to install system was essential in order to have as little disruption to the house as possible.
Cotswold Barn Conversion - Hep2O Underfloor Heating
At a two-storey barn conversion in the Cotswolds, a comprehensive Hep2O underfloor heating system from Wavin has been specified to provide cost-effective and efficient heat distribution across both floors – helping the building to achieve BREEAM and CoSH targets for energy efficiency and thermal performance.
Underfloor heating in family home gives a very warm welcome
Hep₂O underfloor heating keeps the Douglas’s family cosy and warm with the installation of their beautiful 25m² orangery extension. It goes without saying that one of the most fundamental requirements of any building is to keep occupants warm and comfortable, regardless of the weather outside and the nature of the property. One of the fastest ...